# Manual Mode

## Copy Mode

<div align="left"><figure><img src="https://1153017172-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgH4XUgAUFdJrWypZgJFn%2Fuploads%2FBujDp1MSTtasaZRRZroC%2Fimage.png?alt=media&#x26;token=cda88547-c52c-430a-be2e-6efadea1c40a" alt="" width="249"><figcaption></figcaption></figure></div>

* If you have a file selected on the right side panel you will see the **`Copy Prompt`** button, press it

<div align="left"><figure><img src="https://1153017172-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgH4XUgAUFdJrWypZgJFn%2Fuploads%2FUN6eUJGkthRtTL9JlAT8%2Fimage.png?alt=media&#x26;token=e0342a21-badb-4fa2-90f0-f50e71278e4d" alt="" width="375"><figcaption></figcaption></figure></div>

* You will se the Copy buttons, for manual mode you will only need the **`Copy this Part`**&#x20;
* Press it and the file content with the prompt will be added to your clipboard (7350 Page size is recommended)
* Send it to your preferred AI (Recommended: Qwen, DeepSeek or any free choice)

<div align="left"><figure><img src="https://1153017172-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgH4XUgAUFdJrWypZgJFn%2Fuploads%2Fi6HJtHcuZf0daWfotJwh%2Fimage.png?alt=media&#x26;token=a3e4ac23-55c9-43c5-ad8c-cb4d12f4a922" alt="" width="209"><figcaption></figcaption></figure></div>

* Insert the AI response in the Translation Inserter tab&#x20;
* Press **`Start Replacement`** button to apply all the changes

## Handwrite Way

<div align="left"><figure><img src="https://1153017172-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgH4XUgAUFdJrWypZgJFn%2Fuploads%2FtPfh56LMlrWGeztH7wgM%2Fimage.png?alt=media&#x26;token=786f32fc-c96f-4ba3-a91a-0782db3ae992" alt="" width="300"><figcaption></figcaption></figure></div>

* Choose a file from the list and press the **`Translate Manually`** button

<div align="left"><figure><img src="https://1153017172-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FgH4XUgAUFdJrWypZgJFn%2Fuploads%2FF643IBYC0L1UHjdgO5WN%2Fimage.png?alt=media&#x26;token=01ca4001-68b8-4ff9-aa32-590112d9628d" alt="" width="375"><figcaption></figcaption></figure></div>

* You will see that the file content is located on the Translation inserter panel
* Modify the lines and if you are ready press the **`Start Replacement`** button to apply the changes (Always keep the numbers at the phrase beggining)